Test point 34

Passenger compartment monitoring sensor Short to B+ or faulty Fault code 34

1. Pull off plug I on the alarm control module.

2. Pull off the plug at the passenger compartment monitoring sensor.

3. Voltmeter at plug I alarm control module pin 24 and ground.

If battery voltage is displayed, check the wiring harness

If no fault is detected in the wiring, replace the passenger compartment monitoring sensor.

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook

Post a comment