Learning functions Immobilizer

The immobilizer code can be entered under menu item Learning functions/immobilizer after the alarm control module is replaced.

Caution!

The immobilizer code cannot be deleted or changed again. An incorrect input will render the control module useless.

> Input and check immobilizer code carefully.

A new remote control can be adapted for the vehicle under menu item Learning functions/transponder key. After the alarm system control module is replaced and the immobilizer code is entered, the old transponders can be adapted to the new control module. Refer to Teaching hand-held transmitter on Page 90 - D 68 and Reading out and transferring remote control on Page 90 - D 71.

Remote control

Up to four remote controls can be adapted to the control module under menu item Learning functions/remote control. After the alarm system control module is replaced and the immobilizer code is entered, the old remote controls can be adapted to the new control module (refer to Reading out and transferring remote control on Page 90 - D 71 and Teaching hand-held transmitter on Page 90 - D 68).

Reading out remote controls

Under the menu item Reading out remote controls, the data of the remote controls can be read out after the alarm system control module is replaced. If it is not possible to read out and transfer the remote controls (e.g. no communication with the control module), the old remote controls can be adapted to the new control module (teaching hand-held transmitter).

Transferring remote controls

Under the menu item Transferring remote controls, the data read out from the remote controls can be transferred to the new control module.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment