Note

The belt tongue must not be inserted in the buckle.

3. Connect ohmmeter on the pin side on pin B7 and ground.

4. Connect ohmmeter on the pin side on pins B7 and B8. Insert the belt tongue in the buckle.

5. Inspect the wiring harness to the triggering unit for pinches and The warning light is on as long as the limit value is exceeded or not

Test point 6

Belt buckle, passenger Fault codes 47, 48,

1. Disconnect the plug connection XI7.

2. Connect ohmmeter on the pin side on pins B7 and B8.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment