Procedure

1. Connect PST2 to the data link connector, and switch on the ignition.

2. Switch on the PST2, select vehicle type 911 (996) and start the automatic control module search with the double arrow key [»].

3. After a brief search, the PST2 reports: "Fault memory reading completed".

4. Select Alarm system in the menu and press the double arrow key [»].

5. Select Learning functions from the selection list and press the double arrow key [>>].

6. Select menu item Read out remote control and press the double arrow key [»].

7. The following message appears on the

Input the key learning code with the arrow keys [v] or [a] and press the double arrow

8. The following message appears on the screen: Check the input key learning code and press

9. The following message appears on the screen: "Remote controls were read out'. Press the double arrow key [«] twice to change to the control module overview. Switch the ignition off, remove the old control module, install the new control module and switch the ignition on again.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment