Porsche Plug Connection X

Power failure during Troubleshooting in accordance with test point 10.

alarm output Fault code 11

Test point 12

Wrong door lock

Fault code 12

Note

This fault concerns only USA vehicles. USA - vehicles do not have

1. Check the driver's side / passenger's side door lock module and, if necessary, replace it with a door lock module for USA vehicles

Test point 13

Left door secured but not locked Fault code 13

1. Pull off plug I on the alarm control module.

2. Disconnect plug connection X 11 (driver's side).

3. Check the lead from the alarm control module plug I pin 30 to the door lock module for short to ground.

Ohmmeter on alarm control module plug I pin 30 and ground.

4. Check driver's side door lock module switch contact. Ohmmeter at plug connection X 11 pin A5 (sleeve side) and ground.

Door not locked Display: < 5 Q

Test point 14

Right door secured but not locked Fault code 14

1. Pull off plug I on the alarm control module.

2. Disconnect the plug connection X 12 (passenger's side).

3. Check the lead from the alarm control module plug I pin 32 to the door lock module for short to ground.

Ohmmeter at alarm control module plug I pin 32 and ground

4. Check passenger's side door lock module switch contact.

Ohmmeter at plug connection X 12 pin A5 (sleeve side) and ground. Door locked. Display: °° Q

Door not locked. Display: < 5

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment