Test point

Hall-effect sensor rear height adjustment, open circuit Fault code 14

This fault is stored in the following cases:

1. There is an open circuit in the wire to the Hall-effect sensor

2. The Hall-effect sensor is faulty.

3. The control module is faulty. Elimination:

Check plug on control module for contact and damage.

Check wire to sensor for damage.

Once the cause of the fault has been found and eliminated, actuate the height adjustment switch. The text in the fault memory changes from present to not present if the cause of the fault

If the fault is still present, replace control module.

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment