Test point

Release on driver's side jams Fault code 44

This fault is stored if the safe drive motor cannot be actuated, the safe contact (microswitch) is not connected to ground after release, or the alarm system control module is coded incorrectly (country coding).

1. Check the country coding in the menu item Coding

2. Select (Drive links) "Secure doors" with PST 2, and check whether the

If the drive motors react, select "Driver's side secured" and "Passenger's side secured" in the menu item Input signals, and close

Vehicle not secured

Driver's side not secured Passenger's side not secured

If the display of the PST2 deviates from this information or if the drive motor does not react, a fault is present in the supply lead or in the

Pull plugs I and II off the control module Pull plug off door lock on driver's side

Voltmeter at alarm system control module plug II pin 3 and ground Ohmmeter at alarm system control module plug II pin 3 and ground

Ohmmeter at alarm system control module plug II pin 3 and plug on driver side door lock pin 1

Ohmmeter display: < 5 Q

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment