Test point

Central locking system These faults are stored in the memory if at least one safe contact does synchronisation not reach the safe position after two synchronisation actuations towards

Fault code 46, 47 safe.

1. With PST 2 (drive links), check whether the drive motor reacts with

If the drive motors react, select "Driver's side locked" and "Passenger's side locked" in the menu item Input signals, and close the doors

Vehicle not locked

PST2 display Driver's side not locked

Passenger's side not locked

If the display of the PST2 deviates from this information or if the drive motors do not react, a fault is present in the supply lead or in the door

Pull plug I off the alarm system control module Pull plug off door lock (driver's side / passenger's side)

Voltmeter at alarm system control module plug I pin 5 and ground Ohmmeter at alarm system control module plug I pin 5 and ground Ohmmeter on alarm system control module plug I pin 5 and plug on

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment