Test point 5

ABS speed

Engine off

Vehicle raised

Ignition on

Slowly rotate the rear left wheel by hand PST2 display greater than 1 km/h

If 0 km/h is displayed when the wheel is rotated:

1. Check fuse B9

2. Switch ignition off and pull off plug on the control module

Switch ignition on

Rotate the rear left wheel by hand and measure the voltage (AC range) between terminal 11 and ground

Voltmeter display greater than 1 V

If the wheel speed signal is present at the control module, replace the control module. If the wheel speed signal is not present at the control module, check the wire for open circuit or short to ground and check the ABS or PSM control module.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment