Test point

Door lock barrel open/closed

1. Pull off plug I on the alarm control module.

2. Disconnect plug connection X 11 (driver's side).

3. Disconnect the plug connection X 12 (passenger's side).

Short to ground Fault code 06

4. Check the leads from the alarm control module plug I pin 35 to the door lock modules for short to ground.

Ohmmeter at alarm control module plug I pin 35 and ground

5. Check driver's side door lock module switch contact.

Ohmmeter at plug connection X 11 pin A4 (sleeve side) and ground Door lock not actuated. Display: q

Door lock actuated towards "Closed".

6. Check passenger's side door lock module switch contact. Ohmmeter at plug connection X 12 pin A4 (sleeve side) and ground.

Door lock actuated towards "Closed" Display: < 5 £2

7. Check the leads from the alarm control module plug I pin 15 to the door lock modules for short to ground.

90 01

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment