Test point 8

Hall-effect sensor fore-and-aft adjustment, open circuit Fault code 8

This fault is stored in the following cases:

1. There is an open circuit in the wire to the Hall-effect sensor

2. The Hall-effect sensor is faulty,

3. The control module is faulty. Elimination:

Check plug on control module for contact and damage

Check wire to sensor for damage.

Once the cause of the fault has been found and eliminated, actuate the fore-and-aft adjustment switch. The text in the fault memory changes from present to not present if the cause of the fault has really been

If no fault is detected in the wire on the sensor, replace the electric motor for seat adjustment.

If the fault is still present, replace control module

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment