Test point 9

Coolant level

Ignition on Engine off

PST2 display: OK

If not:

Check coolant level in reservoir Switch off ignition

Pull off plug II on the instrument cluster

Pull off plug on sensor for coolant level display

Ohmmeter on instrument cluster plug II pin 5 and ground

Ohmmeter display:

Ohmmeter on instrument cluster plug II pin 5 and plug on reservoir

Ohmmeter on reservoir plug pin 2 and ground

Ohmmeter display:

See also Drive links chapter "Coolant warning light "and "Coolant temperature"

If oil pressure "not present' is displayed when the engine is running Check oil level Switch off ignition

Pull off plug II on the instrument cluster

Ohmmeter on instrument cluster plug II pin 6 and ground

Disconnect plug on oil pressure switch

Ohmmeter o^n instrument cluster plug II pin 6 and plug on oil

Push plug onto oil pressure switch Engine idling

Ohmmeter on instrument cluster plug II pin 6 and ground Check oil pump

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment