WwwWorkshop Manualscouk

ParkAssistent Diagnosis


Erase fault memory, move shift lever out of reverse gear and switch off ignition. Next, switch ignition back on, move shift lever into reverse and read out fault memory.

If the fault reappears, check the plug on the sensor for open circuit.

If no open circuit can be detected, check sensor plug, pin 1 to pin 4 and pin 1 to pin 2, for continuity using an ohmmeter. There should be no continuity.

If no short circuit can be detected, replace sensor.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment