Disassembling And Assembling Selector Linkage

Disconnect bracket, in so far as it is mounted on the frame tunnel, to remove the central tube (see Removing and Installing Central Tube), 2, Mount bearing unit (selector rod coupling) on interior selector rod of transmission with tapered bolt. If applicable, use Loctite No. 270 (see page 34 - 8 d). 3. Assemble guide tube with bracket (guide tube bearing and ball socket. Assemble selector lever, selector rod and guide tube, lubricating all bearing surfaces with...

Disassembling And Assembling Manual Transmission

Mount transmission on assembly stand with special tool 9149 and drain transmission oil. 5. Remove circlip for countershaft and take out countershaft. 2. Remove differential (see page 39 -1). 3. Engage 5th gear, drive out roll pin (A) for shift finger and only then (when spring is relaxed) split pin (B) for spring support. Disassembling order is important, since otherwise the accelerated split pin (B) could cause injury. 7. Remove bearing cover by turning and pulling. Remove O-ring and pull out...